MVMS Management Server User Manual
3.2 Modify or Delete Device
After devices are added successfully, they will be listed as below.
The device channel number, alarm status, online status and record status can be viewed from the above table.
Click
to modify the IP address, port and so on.
Click
to delete the added device. Check the devices and click [Delete] to delete devices in bulk.
3.3 Device Upgrade
In the ― Add, Edit or Delete Device‖ interface, check the devices you want to upgrade and then click [Batch Upgrade for IPC] to upgrade
the firmware of IPC.
Note: When multiple IPCs are upgraded simultaneously, the selected IPCs must be the same series.
3.4 Device Setting
Go to HomeDevice Setting interface as shown below. In this interface, the parameters of the device can be set up.
Different devices have different menus. Please configure the device according to the corresponding user manual.
8