Toro Workman GTX EFI Operator's Manual page 14

Light Switch
The light switch is located to the left of the steering
column (Figure 10). Use the light switch to illuminate
the headlights. Push the light switch up to turn on the
headlights. Push the light switch down to turn off the
lights.
Figure 10
1. Light switch
Hour Meter
The hour meter is located to the right of the light
switch (Figure 10). Use the hour meter to find out the
total number of engine hours. The hour meter starts to
function whenever you turn the key switch to the O
position, S position, or if the engine is running.
TART
Note:
When the machine is running, the hour meter
blinks continuously, recording usage.
USB Power Point
The USB power point is located to the left of the
parking-brake lever (Figure
to power mobile devices.
Important:
When you are not using the USB
power point, insert the rubber plug to prevent
damage to the power point.
g033954
2. Hour meter
6). Use the power point
Fuel Gauge
The fuel gauge (Figure
in the filler cap, at the left side of the machine. The
gauge displays the amount of fuel in the tank.
1. Empty
2. Half full
N 3. Needle
Passenger Handholds
The passenger handholds are located on the outside
of each seat (Figure
1. Passenger handhold
14
11) is located on the fuel tank
Figure 11
4. Full
5. Fuel-tank cap
6. Fuel gauge
12).
Figure 12
Passenger Side Shown
g033956
g033955