Specifications - Kenwood R-SE9T Instruction Manual

Specifications

Receiver (R-SE9T)
[Amplifier section]
Rated pow er output
(DIN) 1 kHz at 6 Ω, 0.7 % T.H.D. ........... 40 W + 40 W
Total harmonic distortion
............................ 0.06% (40 Hz ~ 20 kHz, 20 W, 6 Ω)
Frequency response ........ 20 Hz ~ 40 kHz, +0 dB, –3 dB
Input sensitivity / Impedance
.......................................................... 200 mV / 47 kΩ
Output level / Impedance
SUPER WOOFER PRE OUT ................ 2.0 V / 1.5 kΩ
TAPE REC ........................................... 200 mV / 1 kΩ
Signal to noise ratio
............................................................. 92 dB (IHF'66)
Total control
BASS ........................................... ±10 dB (at 150 Hz)
TREBLE....................................... ±10 dB (at 10 kHz)
[FM Tuner section]
Tuning frequency range ............... 87.5 M Hz ~ 108 M Hz
Usable sensitivity (DIN)
M ONO
.. 1.2 µV (75 Ω) / 13.2 dBf (40 kHz DEV., S/ N 26 dB)
Signal to noise ratio
(DIN w eighted at 1 kHz, 65.2 dBf input)
M ONO .............................................................. 65 dB
STEREO ............................................................ 58 dB
Selectivity (DIN ±300 kHz) .................................... 64 dB
Stereo separation (DIN at 1 kHz) ........................ 40 dB
[AM Tuner section]
Tuning frequency range ................ 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/ N 20 dB)
.................................................... 12 µV / (500 µV/ m)
Signal to noise ratio (at 30% mod., 1 mV input)
........................................................................... 48 dB
Output level / Impedance (30% mod., 1 mV input)
............................................................... 0.18 V / 1 kΩ
General
Pow er consumption .............................................. 80 W
Dimensions .................................................. W: 213 mm
Weight (net) .......................................................... 3.8 kg
1.KENWOOD follow s a policy of continuous advancements in development. For this reason specifications may
be changed w ithout notice.
Notes Notes
2.Sufficient performance may not be possible at very low temperatures (0°C or less).
Downloaded from: http://www.usersmanualguide.com/
CD player (DP-SE9)
Laser ............................................. Semiconductor laser
Playing rotation .................... 200 rpm ~ 500 rpm (CLV)
Frequency response ................. 4 Hz ~ 20 kHz, ±1.0 dB
Signal to noise ratio ......................... M ore than 100 dB
Dynamic range .................................... M ore than 95 dB
Total harmonic distortion
.................................... Less than 0.004 % (at 1 kHz)
Channel separation .......... M ore than 92 dB (at 1 kHz)
Wow & Flutter ............................. Unmeasurable Limit
Output level / Impedance
Fixed ........................................................ 1.2 V / 1 kΩ
Digital output
Optical ...................................... –15 dBm ~ –21 dBm
General
Pow er consumption .............................................. 10 W
Dimensions .................................................. W: 213 mm
Weight (net) .......................................................... 2.2 kg
Cassette deck (X-SE9)
Track ...................................... 4-track, 2-channel stereo
Recording system ................................ AC bias system
Heads
Playback / recording head ...................................... 1
Erasing head ............................................................ 1
M otors........................................................................... 1
Wow and flutter ................................. 0.1 % (W.R.M .S.)
Fast w inding time ...................... Approx. 110 seconds
Frequency response
TYPE I tape .................... 40 Hz to 18,000 Hz, ±3 dB
TYPE II tape ................... 40 Hz to 19,000 Hz, ±3 dB
Signal to noise ratio
Dolby B NR ON ............................ 67 dB (CrO
Dolby C NR ON ............................ 73 dB (CrO
Dolby NR OFF .............................. 60 dB (CrO
Input sensitivity / Impedance ............ 77.5 mV / 47 kΩ
H: 97 mm
Output level / Impedance ................... 775 mV / 10 kΩ
D: 282 mm
General
Pow er consumption .............................................. 14 W
Dimensions .................................................. W: 213 mm
Weight (net) .......................................................... 2.3 kg
55
R-SE9 T/ DP-SE9 / X-SE9 (En)
(w ave length 660 nm)
H: 97 mm
D: 249 mm
(Frequency: 105 kHz)
(C-60 tape)
tape)
2
tape)
2
tape)
2
H: 77 mm
D: 249 mm