Table of Contents
Advertisement
CC404 | Operators Guide | 12.0
12.0 Telco Arm/Disarm
Sequence (Call Forward
On/Off)
12.1
Telco Arm Sequence
Use this section to program the Call Forward –
Immediate On sequence or Call Forward – No
Answer sequence to automatically operate when you
arm the system in AWAY Mode. This feature is only
available if your telecommunications provider has the
call-forward option.
The examples given in this feature are
only applicable to Australia.
Call Forward – Immediate On
You can redirect calls to anywhere in Australia,
including mobile phones, pagers, and answering
services. When Call Forward is turned on, your
telephone does not ring.
Call Forward – No Answer
If your telephone is not answered within 20 sec, this
feature redirects all incoming calls to another number
anywhere in Australia. When this feature is enabled,
you can still make outgoing calls.
Table 10: Telco Arm/Disarm Dialling Digits
Digit
Number to
Required
Program
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
To program the Telco Arm Sequence:
1. Enter your four-character Master Code and press
[3 #] (for example, [2 5 8 0 3 #]).
Three beeps sound and the STAY and AWAY
indicators flash.
2. Press [1 #] to select the Telco Arm Sequence.
Three beeps sound.
3. Enter the call forward sequence (for example,
[* 6 1][Phone Number][#] to program the Call
Forward - No Answer sequence, or [* 2 1][Phone
Number][#] to program the Call Forward
Immediate sequence).
To program a "*" in the Telco Arm Sequence,
enter [* 1]. To program a "#" in the Telco Arm
Sequence, enter [* 2].
12
Telco Arm/Disarm Sequence (Call Forward On/Off)
Digit
Number to
Required
Program
8
8
9
9
*
*1
#
*2
4-sec pause
*3
break
*4
4. Press [#] when finished.
Two beeps sound, and the STAY and AWAY
indicators turn off.
To disable the Telco Arm Sequence,
enter the call forward sequence as [* 4]
(break) for Step 3.
12.2
Telco Disarm Sequence
This feature automatically disables the call forward
sequence when disarming the system.
To program the Telco Disarm Sequence:
1. Enter your four-character Master Code and press
[3 #] (for example, [2 5 8 0 3 #]).
Three beeps sound and the STAY and AWAY
indicators flash.
2. Press [2 #] to select the Telco Disarm Sequence.
Three beeps sound.
3. Enter the call forward disable sequence (for
example, [# 6 1 #] to disable the No Answer
Call Forward sequence, or [# 2 1 #] to disable
the Call Forward Immediate sequence).
To program a "#" in the Telco Disarm Sequence,
enter [* 2].
4. Press [#] when finished.
Two beeps sound, and the STAY and AWAY
indicators turn off.
To disable the Telco Disarm Sequence,
enter the call forward sequence as [* 4]
(break) for Step 3.
Bosch Security Systems | 7/05 | F01U009494B
Advertisement
Table of Contents
