Cloths Ch-th. disin.
The pre-set disinfection process can
be altered in the Cloths chemo-
thermal disinfection programme.
- 40 °C/20 min
- 60 °C/20 min (factory default)
- 70 °C/10 min
Pre-treat cloths rpm
The pre-set spin speed can be altered
in Finish/Pre-treat cloths programmes.
- 400 rpm
- 600 rpm
- 800 rpm (factory default)
- 1000 rpm
Empty sensor
A siphon contact can be used to de-
tect whether external detergent con-
tainers are empty. A message appears
if a container is empty.
- Off (factory default)
The Empty sensing function is
switched off.
- Normally open contact
The siphons are equipped with a nor-
mally open contact.
- Normally closed contact
The siphons are equipped with a nor-
mally closed contact.
Supervisor level
Early warning counter
An internal counter reports when an
external dispenser container is almost
empty. The counter in question then
has to be reset.
Water level Cottons
You can increase the water level for
the main wash in the Cottons pro-
gramme.
- + 0 mm wc (factory default)
- + 10 mm wc
- + 20 mm wc
- + 30 mm wc
Water level Minimum iron
You can increase the water level for
the main wash in the Minimum
iron programme.
- + 0 mm wc (factory default)
- + 10 mm wc
- + 20 mm wc
- + 30 mm wc
77