Reading The Manual And Viewing The Safety Training Material - Toro Workman GTX Operator's Manual

2
Checking the Fluid Levels
and Tire Pressure
No Parts Required
Procedure
1. Check the water level in the batteries before
operating the machine; refer to
Water Level of the Batteries (page
2. Ensure that the batteries are charged; refer to
Charging the Batteries (page
3. Check the brake-fluid level before the machine is
first operated; refer to
Level (page 44).
4. Check the air pressure in the tires; refer to
Checking the Tire Pressure (page
Checking the
36).
35).
Checking the Brake-Fluid
22).
3
Reading the Manual and
Viewing the Safety Training
Material
Parts needed for this procedure:
1 Operator's Manual
1 Safety training material
1 Registration card
1 Predelivery Inspection Form
1 Certificate of Quality
2 Key
1 Charger cord (Domestic Models only)
Procedure
•
Read the Operator's Manual.
•
View the safety training material.
•
Fill out the registration card.
•
Complete the Predelivery Inspection Form.
•
Review the Certificate of Quality.
13