Recording A Cue Or Look; Recording A Cue; Fast Description; Detailed Description - Philips basicPalette II Installation And Setup Gude

Installation & Setup Guide

RECORDING A CUE OR LOOK

1. Recording a Cue

Fast Description

The following works in any console personality:
Step 1. Select channels and set levels.
Step 2. Press [RECORD] [ENTER] or [RECORD], Cue #, [ENTER] or [RECORD] [SELECT] on the Playback
you want to use.
Notes:
• [SHIFT] [RECORD] allows you to record via the dialogue box.
• If you want to keep the Record Cue dialogue box open to add a label or change the record options, hold down
[SHIFT] before pressing [SELECT].
• If the blue box is resting on the last cue of the cue list, the Record dialogue box will be automatically stuffed with
the next whole number if the last cue is a whole number. If it's a point cue, then the next point cue will be sug-
gested.

Detailed Description

Step 1. Set the levels you want to record in a cue. The levels can be set by any method (using the mouse, the
keypad, Looks, Groups, etc.).
Step 2. Press [RECORD] or click the Record button on the "Tool Bar." for the command line solution.
Step 3. If [SHIFT] [RECORD] is used, the Record dialogue box will open:
Step 4. Enter a cue Number. (The number in the [S2] box should be the next available cue at the end of your cue list
or it will be cue number highlighted by the blue box.) The Cue Number box is active by default, so you can
just enter a number and press [ENTER].
6 4
Operation
Palette II Lighting Control Console