Using The Lcd Display; Changing The Display Page; Using The Display Buttons - Yamaha Electone STAGEA ELC-02 Owner's Manual

Using the LCD Display

Using the LCD Display
This instrument features a special touch panel that allows
you to change the parameters by simply touching the
'virtual' buttons or sliders on the display. (Please note that
two or more parameters cannot be operated
simultaneously.)
You can also use the Data Control dial (page 12) to make
fine changes to the parameter value shown in the display.
NOTE
When cleaning the display, use a soft, dry cloth.
NOTICE
Do not use any sharp or hard tools to operate the touch
panel. Doing so may damage the display.

Changing the display page

There are some oval-shaped numbered buttons at the top
right of the display. Pressing these buttons changes the
"page" of the display. The button of the selected page is
highlighted in orange.
Page 1
Page 2
Press this button
to select Page 1
14 ELC-02/ELCU-M02 Owner's Manual
Press this button Press this button
to select Page 2 to select Page 3

Using the display buttons

There are three types of display buttons: those that select
a function, those that switch a function on/off, and those
that open a list or menu of parameters. To select the
desired function, simply press the button in the display
directly.
To switch a function on/off or open a parameter list, see
the instructions below.
To switch the function on or off:
Off, or muted (button is grayed out)
You can independently mute each Voice section in the
Voice Display, each accompaniment part in Rhythm
Menu display, and each Element in the Voice Edit display.
On