(4)
Lift up the CIS unit, disconnect 1 connector
on the bottom of the CIS unit, and then take
off the CIS unit.
Notes:
•
Take care not to contaminate the CIS unit
surface with fingerprints, dust or such.
•
Be sure to perform "05-310" with the
platen cover or the ADF closed after
replacing the CIS unit.
(5)
Release 2 latches each to take off 2 original
glass guides from the CIS unit.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
CIS unit
Fig. 6-22
Original glass guide
Fig. 6-23
6 - 17
07/02
Connector
e-STUDIO163/203
SCANNER
6