Toshiba E-STUDIO352 Printing Manual page 331

— Banner Paper Source
The banner paper source can be specified using the following option.
Alternate
Option Value
Value
bauto-source
bdrawer1 bupper
bcas1
bdrawer2 blower
bcas2
bdrawer3 bpedupper
bcas3
bdrawer4 bpedlower
bcas4
blcf BLCF
If the banner paper source is not specified the PCL5e auto paper source command "<esc>&l7H"
will be sent. The banner page source cannot be set to manual feed. The paper size always has
priority over the paper source.
Example: The command to specify that the banner page paper source is the LCF is
"lp -o blcf filename".
— Banner Media Type
The banner page paper source can also be selected using the media type using the following
option.
Alternate
Option Value
Value
bmtype=Plain1
bmtype=
Transparency
bmtype=Thick1
bmtype=Thick2
bmtype=Thick3
The paper size always has priority over the media type and the paper source.
If this option is not specified the command will not be sent so the printer's default value will be
used to print the banner page.
The command to specify that the banner page should print on a colored media type is
"lp -o bmtype=Plain1 filename".
Description
Select the auto paper tray selection.
Select the 1st drawer.
Select the 2nd drawer.
Select the 3rd drawer.
Select the 4th drawer.
Select the LCF. LCF is not available for some countries
or regions.
Description
The paper source that contains Plain1 paper is
requested.
The paper source that contains transparency slides is
requested.
The paper source that contains Thick1 paper is
requested.
The paper source that contains Thich2 paper is
requested.
The paper source that contains Thich3 paper is
requested.
Printing from an Application 329