A
Getting Started
!
CABLE
AUTO
PROGRAM
SELECT
Step 1
Insert the batteries (supplied) into the remote.
Note
• Do not use old batteries nor use different types of batteries
together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components.
(See E)
Step 3
Plug in the power cord, then press ! on the TV to
turn it on.
Step 4
Press CABLE on the remote to select "CABLE: ON",
then press AUTO PROGRAM on the remote to preset
the channels automatically. (See J)
Tip
• To stop the automatic channel presetting, press SELECT.
Step 5
Press SELECT on the remote until "LANGUAGE/
: ENGLISH" appears on the screen, then press
+ or – to change the on-screen display language.