Panasonic AG-CPD10CRUP Operating Instructions Manual page 24

LEDs and recorder status
5 The READY LED does not light if the Memory Card Video Recorder is not
capable of recording.
Recorder administrator settings can be changed from the Toughbook-Arbitrator
6
Front End Software.
• If recording is already in progress or if recording cannot be started when the
REC button is pressed or a recording start trigger is activated via the
GPIO/SERIAL port, the REC LED flashes for about 1 second.
• During card access immediately after the cover was opened or closed, the
BUSY LED flashes.
24
(continued)