Table of Contents
Advertisement
(Continued)
Caution:
In the following cases, the timer recording function
will not work.
When a MiniDisc has not been inserted.
When a playback-only MiniDisc is inserted.
When the MiniDisc you inserted is protected
against accidental erasure.
When there is no recording space left on the
MiniDisc you have inserted (when the "TOC FULL
" or "DISC FULL" messages appear).
Sleep operation
The radio, compact disc and MiniDisc can all be
turned off automatically.
(Remote control operation)
TIMER
SLEEP
ENTER
1
Play the desired sound source.
2
Press the SLEEP button.
If you do not need to change the time, the unit
will enter the sleep mode automatically.
3
Within 5 seconds, press the ENTER button.
4
Press the
or
button to adjust the time.
(Maximum: 2 hours - Minimum: 1 minute)
The amount of sleep time can also be changed
during the sleep operation.
5
Press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
6
The unit will enter the stand-by mode automati-
cally after the preset sleep time has elapsed.
To cancel the sleep operation:
Press the POWER button to enter the stand-by
mode.
The sleep operation can also be canceled as fol-
lows if you can not set the unit to the stand-by mode
1
during recording.
2
Notes:
/
To use sleep and timer playback in combi-
1
nation:
2
To use sleep and timer recording in com-
1
bination:
REC
SLEEP
SLEEP
2
Sleep timer setting
REC
SLEEP
REC
SLEEP
REC
SLEEP
SLEEP
33
Press the SLEEP button.
"SLEEP" will flash.
Within 5 seconds, press the SLEEP button again.
The sleep operation will be canceled.
("SLEEP" will go out.)
Once the sleep time is set, it will remain the same
duration until the setting is changed.
The sleep functions of this unit cannot be used
to control equipment connected to this unit. You
must use the sleep functions of the other equip-
ment, if it has them.
Simultaneous sleep and timer op-
eration
Perform steps 1 - 9 on page 31 "Timer playback".
Perform steps 1 - 5 of the "Sleep operation" on
this page.
Perform steps 1 - 9 on page 32 "Timer record-
ing".
Perform steps 1 - 5 of the "Sleep operation" on
this page.
Timer playback
Timer playback
(record) setting
(record) start
1 minute - 2 hours
Sleep operation will
automatically stop.
Desired time
End time
Advertisement
Table of Contents
