Sharp MD-M1 Operation Manual page 10

(Continued)
Placing the system
4" (10 cm)
8" (20 cm)
Be sure to keep space between the units for ven-
tilation.
Keep the top of this unit at least 8" (20 cm) away
from the wall, and the back at least 4" (10 cm)
away.
Note:
Do not place the system or speakers near the
television set as the magnetic fields produced
may cause irregular colours to be displayed.
Connecting the AC power cord
To AC INPUT
Connect the AC power cord to the AC INPUT jack,
then connect the AC power cord plug to an AC out-
let.
Notes:
Unplug the AC power cord from the AC outlet if
the unit will not be in use for a prolonged period
of time.
Never use a power cord other than the one sup-
plied. Use of a power cord other than the one
supplied may cause an electric shock or fire.
4" (10 cm)
4" (10 cm)
AC 120 V, 60 Hz
To an AC outlet
9
Demo mode
When the AC power cord is first connected, the unit
will enter the demonstration mode and the words
will scroll across the display continuously.
To cancel the demonstration mode:
When in the demonstration mode, set the DEMO
switch to OFF.
Then turn the power on and then enter the stand-
by mode to cancel the demonstration mode and to
enter the low power consumption mode.
Note:
When the unit is in the low power consumption
mode, the display will disappear.
To return to the demonstration mode:
Set the DEMO switch to ON. Then turn the power
on and then enter the stand-by mode.
DEMO
ON
OFF