HP ENVY x360 Convertible Maintenance And Service Manual page 62

b. Disconnect the cable (2) from the module.
3. To remove the display hinges:
NOTE:
a. Position the display enclosure upright.
b. Remove the Phillips PM2.0×2.5 screw (1) from the top of each hinge and the four broadhead
Phillips PM2.5×3.0 screws (2) from the bottom of each hinge that secure the hinges to the display.
52 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
The display hinges are available using spare part number 807525-001.