Hitachi H 45MEY Service Manual page 7

3. Disassembly of the motor unit
(1) Firmly hold the Housing [52]{49} and use a
plastic hammer to tap the shaft of the Rotor
[102]{99} until the spigot joint of the Gear Cover
[99]{96} is removed from the Housing [52]{49}.
(2) The Rotor [102]{99} has strong magnetic force.
Firmly hold the Housing [52]{49} and pull out the
Gear Cover [99]{96} from the Housing [52]{49}.
NOTE: Without the Gear Cover [99]{96}, the
Rotor [102]{99}
attracted and fixed to the Stator
Sensor PCB Set [45]{42} by its own
magnetic force. Be careful not to get
your hand caught between the Rotor
[102]{99} and the Stator Sensor PCB
Set [45]{42}.
will be strongly
-6-
Tap the shaft of the rotor.
[99]{96}
[52]{49}
[102]{99}