(6) Mounting the spacer
Insert the Spacer [48]{45} into the Housing [52]{49} aligning its two protrusions with the grooves on
the Housing [52]{49}. Be careful of the mounting direction of the Spacer [48]{45}. After inserting, push
the Spacer [48]{45} deep into the Housing [52]{49} so that the Spacer [48]{45} does not protrude from
the end surface of the Housing [52]{49}.
NOTE: After mounting the Spacer [48]{45}, turn the Housing [52]{49} upside down to check
whether the Spacer [48]{45} drops from the Housing [52]{49} or not.
• Mounting the spacer
Protrusions of [48]{45}
[48]{45} (2 pcs.)
Grooves for mounting [48]{45}
[52]{49}
Push the spacers deep into the housing
so that the spacers do not protrude from
the end surface of the housing.
-10-