Boot - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 3 Useful Features
1.2.5

Boot

If you move the cursor to Boot, the Boot menu where you can configure the boot order appears.
For details about the options, see the table below.
Option
Boot Configuration
Quiet Boot
Bootup NumLock State
Setup Prompt Timeout
Boot Mode
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
CD/DVD Priorities
HDD Priorities
Network Priorities
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
Parameter
–
Disabled Enable or disable the feature to display logo during
[Enabled] POST. When this option is set to Disabled, the results of
POST execution are displayed instead of the logo.
If BIOS Redirection Port is enabled, this option is
shown as Unavailable and inaccessible (run with
Disabled state automatically)
On Enable or disable NumLock feature of keyboard.
[Off]
[0] to 65535 Specify the time 0 to 65535 seconds until the <F2> is
pressed to launch SETUP.
Legacy Specify the boot mode.
[UEFI]
Before physical formatting of hard disk drive, set this
option to "Legacy" After the physical formatting is
complete, return the mode from Legacy to UEFI.
–
– These items display the priority of boot devices.
–
–
–
– Specify the boot priority for each device type.
–
–
Descriptions
–
–
[ ]: Factory settings
1. System BIOS
213