Sharp SRS Mounting System Installation Manual page 30

6 1
IN S TAL L AT IO N WO Rk
12. Place the tile slider over the standoff and secure with
two 135 mm screws (XA50).
Drill guides.
Never use drill
guide holes
for tile roof
standoff screw
Middle row,
holes 2 & 4
The arrow points
towards the eave.
13. Push the top butyl pad into the silicone dome. Make
sure that the silicone caulk forms a bead around the
butyl pad.
Top butyl pad
(AE106)
Bottom butyl pad
(AE105)
Notice: Butyl pads should be pushed down after
sliders are secured to stand off with two 135 mm
screws (XA50).
Align the end with
the hole guide line
Front row,
holes 1 & 3
Top row,
holes 3 & 5
Tile roof stand off screw
(XA50)
Tile roof slider
(AE110)
Tile roof stand off
(AE104)
Support AL plate
(AK111)
CORRECT
14. Insert the roof tile slider bracket into the slider and
prepare for rail installation.
Tile roof slider bracket
(AE102)
Repeat this process for all of the tile standoffs.
 0
Silicone
WRONG
Silicone