GE MobileLink CB-1000 Installation And Troubleshooting Manual page 19

Revision D
Installation Procedures
7. Using the two screws removed in step 6, attach the client bridge
mounting bracket to the original style bracket.
8. Using the two screws removed in step 5, attach the power supply to
the original style bracket as shown below. Route the communications
cable between the power supply and the plastic client bridge bracket
9. Snap the client bridge onto the client bridge mounting bracket as
shown. Ensure that the communications cable is not pinched under
the client bridge.
MobileLink
2002783-060
mounting
screws
38A
power cable
communications
cable
43A
44A
15