Advertisement
Install RCU Connect application:
Unzip the install folder to a suitable
place on your PC, such as your desktop,
and open the RCU Connect folder which
has been created.
Run the RCUConfigureSetup.exe self-
extracting installation program (double-
click it).
If you have a previous version of RCU
Connect installed, you do not have to
uninstall it before installing the new
version.
The installation process offers to install
RCU Connect to a standard location.
Accept this default location unless you
have a good reason not to (see Table 5:
Location on page 40).
Accept the licence agreement.
RCU Connect has now been installed. An
icon is on the desktop and in the program
menu.
Install drivers
When using Windows® 7, first plug in the
USB antenna. Usually Windows® 7 finds and
installs drivers automatically. If not, then act
as for Windows Vista®.
To install drivers on Windows Vista® and
Windows® XP, first plug in the USB antenna,
and when prompted for drivers, direct the
installer to the USB2 drivers folder.
1. Select the "Install from a list or specific
location (Advanced)" checkbox.
2. Click "Next".
3. Browse to the USB2 drivers folder that
you installed.
4. Click "Next".
The installation is now complete.
In some instances after plugging in the USB
antenna, Windows® does not automatically
prompt to search for drivers. In this case,
the following steps are necessary:
1. Click on the Windows start menu.
2. Select the control panel option.
3. Select the device manager option.
4. Expand the LibUSB-Win32 Devices to
show the ANT USB Stick 2 option.
5. Right click on the ANT USB Stick 2 option
to show the menu. Click the "Update
Driver Software..." option.
6. Select the Browse for driver files option
and browse to the USB2 drivers folder
that you installed.
7. Click "Next".
8. The installation is now complete.
Figure 35: Manual USB driver
update
Figure 34: Install drivers
39
Advertisement
