Table of Contents
Advertisement
BUTTON
FUNCTION
Manikin Pads LEDs. Press to illuminate LEDs for pads
placement on the manikin chest. (Applicable only when
using Laerdal LINK electrodes and a Laerdal LINK
manikin.)
Error Condition. Press to simulate an AED error
condition in the AED Trainer 3. (The AED Trainer 3 turns
off and chirps every 10 seconds. NOTE: To clear the
error condition and turn on the AED Trainer 3 for
further use, press the green On/Off button twice.)
AED Low Battery. Press once to simulate a Low
Battery condition in the AED Trainer 3. Press a second
time to initiate a Replace Battery prompt.
Speaker Volume. Press buttons to adjust AED Trainer
3 speaker volume to any of three levels: soft, medium,
and high.
20
Advertisement
Table of Contents
