Huawei FusionModule1000A40 Product Description page 8

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
●
●
●
●
●
Rapid Deployment
●
●
●
●
Determining whether land transportation requirements are met:
● Pavement condition: highway and country road with solid subgrade and damaged
● Test standard: traffic running test for more than 480 km (speed: 30–40 km/h);
Issue 03 (2021-02-10)
668 standard. The pre-fab. module provides sufficient protection (IP55 by
default; IP65 available by changing the dustproof module at the air vent) as it
is assembled by industry-leading welding technologies and well sealed to be
waterproof and dustproof.
Bulletproof: The bulletproof function can be customized. Customization will
change the structure of the pre-fab. module. Side plates of the pre-fab.
module are 4.2 mm bulletproof steel plates and top plates are 2.4 mm
bulletproof plates. The design meets the GJB 4300-2002 V and N. I. J. 0108.01
IIIA standards (distance of 10 m, 56-type 7.62 mm submachine gun or
AK47-7.62X39, initial bullet speed greater than 710 m/s).
Antiseismic: The pre-fab. module meets GR-63-CORE Zone 3 antiseismic
requirements.
Theftproof: The intelligent access control system and mechanical locks provide
multifold security protection and can meet class 3 theftproof requirements in
EN 1627–EN 1630 if required.
Adaptive to environment: The design of two porches prevents sand from
entering the equipment compartment when doors are open during
maintenance, ensuring that the pre-fab. module applies to various harsh
environments.
Fireproof: The fire extinguishing system is reliable, clean, insulating, and
environment-friendly, and can put out a fire efficiently and safely without
damaging equipment, thereby ensuring high equipment availability. The fire
extinguishing system uses heptafluoropropane as the extinguishing agent and
complies with the EU's CE certification.
Streamlined manufacturing, professional division of labor, and good work
conditions ensure that modules and products of the FusionModule1000 are
produced efficiently with strict quality control.
Infrastructures such as cooling equipment, power supply equipment, and
racks are factory-installed. You only need to provide network cables, power
cables, and water pipes onsite for commissioning.
System commissioning is completed in factories, and therefore onsite
deployment and equipment room commissioning take less than one week.
The pre-fab. module can be easily relocated as it can be transported on
level-3 roads and applies to various scenarios such as dynamic data service
deployment, military affairs, disaster relief, and field operations.
NO TE
pavement covering layer, which can be a gravel road, earth-rock road, or concrete or
asphalt road which has not been maintained for a long time; road that has concave pits
with a diameter of 10–15 mm irregularly distributed, the length of the road taking up
more than 60% of the total length. Corrugation waves are allowed on the road, with the
wave distance of 750–1000 mm and wave crest height of 25–50 mm.
emergency brake for six times at a speed of 30 km/h (emergency brake twice at a 30-
degree gradient when going down a slope). After all tests are performed, there are no
obvious damages, such as getting loose or cracks. After power-on, the performance
specifications of all components are consistent with the test data before transportation.
Copyright © Huawei Technologies Co., Ltd.
1 Overview
2