Post Error Messages - NEC Express5800/R120e-2M User Manual

Hide thumbs Also See for Express5800/R120e-2M:
Table of Contents

Advertisement

Chapter 3 Setup
By pressing the designated function key following messages, you can call the functions below
upon completion of POST.
<F2> key:
<F3> key:
<F4> key:
<F12> key: Boot from network.
6.
If a controller which has its dedicated BIOS such as a RAID Controller board is installed, a
message that prompts you to start the dedicated utility to set each board is displayed.
Example: If an optional RAID Controller is installed
Press <Ctrl> <H> for Web BIOS
The utility starts by pressing <Ctrl> + <H> keys.
For details on the utility, refer to the manual supplied with each optional board.
Depending on the configuration, the message "Press Any Key" might appear to prompt a key entry.
This is a behavior of the BIOS of the optional board. Continue to operate after checking the
manual of the optional board.
7.
The OS starts when POST is completed.
1.1.2

POST error messages

When POST detects an error, it displays an error message on the screen or beeps for some errors. For
descriptions of error messages, causes, and countermeasures, see Chapter 3 (1. POST Error Message) in
"Maintenance Guide".
140
Run BIOS Setup Utility (SETUP). For information on the SETUP, see Chapter 2 (1.
System BIOS) in "Maintenance Guide".
Run EXPRESSBUILDER from Internal Flash Memory (optional). For information on
EXPRESSBUILDER, see Chapter 3 (4. EXPRESSBUILDER).
• If the optional Internal Flash Memory is not installed in the system, <F3> key
Note
message will not be displayed.
• <F3> key must be pressed within 5 seconds of the message being displayed.
• Note that the server will not boot from Internal Flash Memory even if it is
specified to do so by pressing <F3> key, as long as a bootable CD/DVD-ROM is
set on the drive.
Run Offline Tools. For information on Offline Tools, see Chapter 1 Maintenance (9.
Offline Tools) in "Maintenance Guide".
Note
Take notes on the indication displayed on display unit before consulting with your
sales representative. Alarm messages are useful information for maintenance.
Express5800/R120e-2M User's Guide
1. Turning on the Server

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8100-2072fNec express5800 series

Table of Contents