Chapter 2 Preparations
5.
Secure the protective cover with six screws you have removed in Step 2.
6.
Disconnect SAS cable from the factory-installed HDD cage.
7.
Install expander board to Expansion Bay and secure it with four screws provided with 2.5-inch
HDD cage.
8.
Connect the SAS cable (short) provided with 2.5-inch additional HDD cage to RAID Controller and
Expander board.
9.
Connect the provided DC cable to Expander board and additional HDD cage.
Express5800/R120e-2M User's Guide
1. Installing Internal Optional Devices
109