Sharp FACSIMILE User Manual page 53

When to replace the imaging
film
Replace the imaging film when the display
shows:
FILM END
Use the following imaging film, which is
available from your dealer or retailer:
Sharp FO-15CR Imaging Film
Caution!
The text of documents printed with the
imaging film is visible on the used film.
If confidential information has been
printed, dispose of the film
appropriately.
Loading Paper in the Paper
Tray
You can load up to 200 sheets of A4
paper (max. 75 g/m2) in the paper tray.
Caution!
Do not use the blank side of paper that
has already been printed on.
1. Remove the paper cover if it is on the
paper tray.
Fan the paper, and then tap the edge
2.
against a flat surface to even the stack.
Quick Reference Guide
3. Pull the paper release plate toward you
and insert the stack of paper into the tray,
print side down.
•
If paper remains in the tray, take it out and
combine it into a single stack with the
new paper before adding the new paper.
4. Replace the paper cover on the paper
tray.
Important: Be sure to replace the
paper cover before you put back the
paper release plate down.
remains in the tray, take it out and
combine it into a single stack with the
new paper before adding the new paper.
Note: If the display shows the
following alternating messages when
making a copy or receiving a fax,
check the paper tray. If the tray is
empty, add paper and then press the
START key. If there is paper, make
sure it is inserted correctly and then
press the START key.
If paper
51