Table of Contents Notice for Users in the USA ..........................4 TCO'99 (LL-T15G1) ............................5 Notice for Users in Europe (LL-T15G1) ......................7 Notice for Users in the UK ..........................8 Notice for Users in Australia ..........................8 Tips and safety precautions ..........................9 Product description ............................
Sharp Plaza, Mahwah, New Jersey 07430 TEL :1-800-BE-SHARP * As an ENERGY STAR Partner, SHARP has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations.
LL-T15G1 Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Page 5
TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire.
Notice for Users in Europe (LL-T15G1) This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.
"WARNING :THIS APPARATUS MUST BE EARTHED" Notice for Users in Australia Service Inquiries Please contact your dealer for service if required or contact Sharp Corporation of Australia on 1 300 13 50 22 for referral to your nearest Sharp authorized Service Center.
If the brightness is adjusted to the minimum setting Sharp Corporation holds authorship rights to the it may be difficult to see the screen. Utility Disk program. Do not reproduce it without The quality of the computer signal may influence permission.
Product description Control Panel MENU SELECT 1. MENU button This button is used to pop-up, select and close the OSD (On Screen Display) Menu. 2. SELECT button This button is used to select menu options when the OSD Menu is displayed.
Product description Adjusting the monitor Standing up and adjusting the monitor Press down on the stand and adjust it to a suitable viewing angle. CAUTION! approx.5° approx.25° Pressure from hands on the LCD panel could cause damage. Standing up the monitor Press down on the stand and lift up the top section of the monitor.
Connecting the monitor and turning the monitor on and off Connecting the monitor to a computer Connecting the monitor to a power source (PC etc.) Before connecting, first turn off the monitor's main power switch. When connecting, ensure that both the monitor and computer are switched off.
Connecting the monitor and turning the monitor on and off Note: Installing set-up information and the ICC If using the monitor for the first time or after profile (for Windows) having changed the system settings during use, Depending on the computer or OS, it may be neces- perform an automatic screen adjustment.
Page 13
Connecting the monitor and turning the monitor on and off For Windows2000 For Windows98 Installing monitor set-up information into Win- Installing monitor set-up information into Win- dows2000, and setting the monitor's ICC profile as a dows98, and setting the monitor's ICC profile as a predetermined value.
Page 14
Connecting the monitor and turning the monitor on and off 5. Select the monitor details from the list, then click 10. Select the monitor from the list displayed and [Next], [Next], and [Finish]. If the "Add new click [Next]. Hardware Wizard" appears, repeat the installa- If [has not passed Windows Logo testing...] tion commands beginning from 2 above.
Connecting the monitor and turning the monitor on and off Information about the ColorSync profile (for MacOS) About the ColorSync profile ColorSync is the Apple Corporation's color man- agement system and is a function that enables color resolution to be realized when used with a compatible application.
Adjusting the screen display Adjustment lock function Adjustment the backlight (right column) By disabling the control buttons (i.e. setting the lock) Brightness of backlight can be adjusted. any attempted changes to adjusted values will be voided. Automatic screen adjustment (p.18) 1.
Adjusting the screen display Adjusting the screen automatically Automatic screen adjustment 1. Press the MENU button. Options in the ADJUSTMENT Menu can be adjusted The ADJUSTMENT Menu will be displayed. automatically (CLOCK, PHASE, H-POS V-POS). AD J U S TME NT Note: MANUAL AU TO...
Adjusting the screen display ADJUSTMENT Menu Manual screen adjustment Adjustments can be made using On Screen Display AD J U S TME NT (OSD) Menu provided. MANUA L AU TO CL OCK 1 2 7 1. Display an image that makes the entire screen PHAS E very bright.
Page 19
Adjusting the screen display GAIN CONTROL Menu WHITE BALANCE Menu WH I TE B AL ANC E GA I N CONTRO L C OOL S TD WA RM USER MANUAL AUT O R- CONTRAST B L ACK LEVEL G- CONTRAST CON TR AST B - CONTRAST 1 0 2 4 X 7 6 8...
Page 20
Adjusting the screen display COLORS MODE SELECT Menu Maximum display colors can be set. ( buttons) MO D E SELECT 260K (260,000) and 16M (16.19 million) O S D H- POS I T I ON O S D V - POS I T I ON 4 0 0 L I NE S 6 4 0 7 2 0...
LCD panel. (A soft cloth such or your nearest Sharp authorized Service as gauze or that used for lens cleaning is suitable.) Center. (Never attempt this replacement on your own.)
15 pin mini D-sub (3 rows) Screen tilt Upward approx.0 - 25°; downward approx.0 - 5° Power supply AC100-240V, 50/60Hz (Use special AC adapter, type NL-A60J of Sharp Corporation.) RGB signal cable: Approx.1.8m Temperature of operating environment 5 - 35°C Special AC adapter:...
Page 24
Specifications Power management DDC (Plug & Play) The monitor is based on VESA DPMS (Display This monitor supports the VESA DDC (Display Data Power Management Signaling). Channel) standard. To activate the monitor's Power Management func- DDC is a signal standard for carrying out Plug & tion, both the video card and the computer must Play functions on the monitor or PC.
Instructions for attaching a VESA compliant arm 5. Attach the arm to the monitor with four screws. An arm based on the VESA standard can be at- tached to the monitor. The arm must be purchased separately. When choosing the arm to be installed please take note of the following points.
Page 26
This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...