Table of Contents
Advertisement
Advanced ARMC Card Configurations,
ARMC Server Heartbeat
ARMC Server Heartbeat is a program that is installed onto the host system. The host
system is the system that has the ARMC card physically installed into it. Once it is
installed, it loads as a Windows Service and is scheduled to run Automatically.
When it is running, it communicates with the ARMC card at your specified time intervals
and is used to tell whether the operating system on the host system is operating or not. It
can also detect whether the operating system was shutdown normally or abruptly.
Do NOT double click on the ARMC Server Heartbeat icon to install it.
Step
Description
1
To install the ARMC Server Heartbeat Time Interval program, left click the START button and then left
click RUN. Do NOT double click on the ARMC Server Heartbeat icon to install it.
Note:
The ARMC card expects a heartbeat from the host system after every configured elapsed time
interval to know that the operating system on host system is up and running.
2
Type in the following command into the RUN field to install the Host Heartbeat Time Interval program:
hostheartbeat
After you type in the command, left click the OK button.
3
The installation will enter the Host Heartbeat Time Interval program into your system's registry and will
copy the ARMC Server Heartbeat program into the SYSTEM32 folder. This concludes the installation
procedure for the ARMC Server Heartbeat program.
106
Acer Remote Management Card (ARMC) User's Guide
Continued
WARNING!
-i
Advertisement
Table of Contents
