Table of Contents
Advertisement
24
To Host
To Host
ID 7
ID 7
ESM
The ESM and TSM can be in either I/O slot of the enclosure.
SCSI ID Assignments shown from front of enclosure.
2
The Bus A LED
will be on for top connector to indicate that first seven
disks are on Bus A. The Bus B LED will be on for bottom connector to
indicate that remaining seven disks are on Bus B. The Environmental
Services (ES) LED is ON for both the ESM and TSM, to show that both of
their ES blocks are active.
Note: Both I/O modules are at ID 15. These modules actively
monitor one of the two buses, respectively.
For information on the I/O module LED, see page 20.
2
Enclosure must be powered on to see the LEDs.
3 Cabling and configuration
1
2
Mute
1
2
TSM
Advertisement
Table of Contents
