Bkdm-3010 Service Overview; Cleaning Of Track Ball - Sony BKDM-3020 Maintenance Manual

Digital multi effects, dme control panel
Hide thumbs Also See for BKDM-3020:
Table of Contents

Advertisement

n
The power of BKDM-3010 is supplied from DME-3000/
7000.
When servicing BKDM-3010, turn off the power of DME-
3000/7000.
At this time, confirm that the LED of the buttons on
BKDM-3010 goes out.

3-1. Cleaning of Track Ball

Clean the oil-stained track ball in the following procedure.
• Cleaning cloth:
3-184-527-01
• Cleaning fluid:
9-919-573-01
1. Turn the ball cover counterclockwise and loosen it,
then remove.
2. Catch the Z-ring on a nail, raise it, then remove.
3. Remove the track ball.
4. Wipe the track ball with a cleaning cloth moistened
with cleaning fluid.
Loosen
Section 3

BKDM-3010 Service Overview

Tighten
Ball cover
Z-ring
Track ball
Z sensor plate
5. Install the track ball.
6. Push in the Z-ring while pressing it against the Z
sensor plate.
7. Turn the ball cover clockwise and tighten it.
Z-ring
Track ball
Track ball
Z-ring
Z sensor plate
Z sensor plate
3-1 (E)

Advertisement

Table of Contents
loading

Table of Contents