7-6
PC Box
Ethernet Interface XLAN
XLAN – Network Connection
XVGA Interface
XVGA – Connection for external
The industrial PC can be connected with an Ethernet network via an
Ethernet interface XLAN.
RJ45 female connector, 8-pin
Type:
Cable length:
Cable type:
Transmission rate:
XLAN, RJ45
8
1
Fig. 7-6:
Ethernet interface XLAN
The driver configuration of the network connection can be called up in the
task bar or in the "Control Panel" with icon "Network Board". Here you can
set among other values, if the data transmission shall occur with
10 Mbits/s and/or with 100 Mbits/s.
Note:
Please observe that the network board of the outstation has to
be able to process the same data transmission rate.
An external monitor (CRT) can be connected to the VGA connection
monitor
(XVGA) and can be operated as an alternative or parallel to a VDP
connected via the G4 display interface.
• Video RAM: 8 MB max.
Note:
Before plugging-in a graphics card the video adapter
integrated in BIOS has to be switched off.
HD female connector, 15-pin
Cable length:
Cable type:
Max. resolution:
Ethernet 10Base T / 100Base X
100 m max.
Shielded, twisted pair
10 or 100 Mbits/s
max. 100 m
1
2
3
4
5
6
7
8
1.5 m max.
Shielded, cross section min. 0.14 mm²
1600 x 1200 pixels, max. 4294 mill.
colors
DOK-SUPPL*-VSB*40.1***-PR02-EN-P
VSB 40.1
To the network
Ethernet_sst.cdr