Panasonic U-8ME1E8E Service Manual page 131

2. Detailed Settings Function
Item code
Automatic drain pump
operation
Ventilation fan operation
Wired remote controller
"Operation change
control in progress"
OFF reminder function
for when weekly timer is
Discharge temperature
Heat exchanger
temperature for cold air
discharge
(Heat exchanger control
point for control to
prevent cold air)
Fan output switching
Drain pump delayed
start time
Humidifi er setting
5
Flap operation mode
Flap swing mode
Item
No.
0000 No forced operation
0001 Forced operation for 1 minute
0060 Continuous operation
0000 None
0001 Ventilation fan operated by remote controller.
0000 Not used. (Body sensor is used.)
sensor
0001 Remote control sensor is used.
0000 Normal (displayed)
0001 Not displayed
display
0000 None
0001 Only stop time setting is enabled.
used
0000 Discharge temperature control OFF
control
0001 Discharge temperature control ON
0013 Control temperature 13°C
0014 Control temperature 14°C
0025 Control temperature 25°C
0026 Control temperature 26°C
0000 Output linked with fan. (ON when indoor unit fan is operating.)
0001 Fan mode operation output
0000 No delayed start
0001 1 sec. delayed start
0002 2 sec. delayed start
0058 58 sec. delayed start
0059 59 sec. delayed start
0060 60 sec. delayed start
0000 Humidifi er output OFF. Drain pump stopped.
0001 Humidifi er output ON. Drain pump operates.
Humidifi er output ON. Drain pump operates for 1 minute when total humidifi er
0002
operating time reaches 60 minutes.
0003 Humidifi er output ON. Drain pump stopped.
0000 Standard setting
0001 Draft reduction mode (Flap lower-limit position is shifted upwards.)
0000 Smudging reduction mode (Flap swing upper-limit position is shifted downwards.)
0001 Normal mode
0002 Draft reduction mode (Flap swing lower-limit position is upwards.)
Setting data
Description
5 - 8
2WAY SYSTEM
Remote Controller Functions