Kenwood DDX3028 Service Manual page 16

DDX3028/3048/3058/318/4038/4038M
DDX4028BT/4038BT/4038BTM/4048BT/4058BT/418
Bluetooth FirmUpdate Mode
Update NG
BACK
[Back] key: valid
[Exit] key: valid
• The following screen is displayed when update informa-
tion (update successful) is received.
Bluetooth FirmUpdate Mode
Update Complete
Please Power Off
or Detach Front Panel
BACK
[Back] key: invalid
[Exit] key: invalid
Production mode (not used for service)
1. Key operation when going into production mode
• Switching to production mode
Press and hold the [FNC] key q and press the [RESET] key w.
2. Display, operation setting, and special key op-
eration in production mode
2-1. Display in production mode
In order to allow the operator acknowledge that they are in
the production mode, "Production Mode" POPUP is con-
stantly displayed.
∗ Except when in MENU screen such as SS mode screen.
16
TEST MODE
2-2. Initial setting in production mode
Volume initial value
Volume maximum value
FAN control
DISC module image output
SETUP > BEEP
EXIT
SETUP > CAMERA INPUT
SETUP > Audio > Fad / Bal
SETUP > Audio > Vol Adjust
SETUP > Audio > HPF Front
SETUP > Audio > HPF Rear
SETUP > Audio > LPF
SETUP > Audio > SW Level
SETUP > Audio > SW Phase
SETUP > Audio > Loudness
SETUP > Audio > Equalizer
SETUP > Audio > Speaker Select
SETUP > Audio > Subwoofer
SETUP > Audio > Preout Setup
EXIT
SETUP > INPUT > AV-INPUT
∗ The value set when starting up the above production
mode or while in the production mode is retained after the
mode is cleared.
2-3. Special key operation in production mode
only (invalid in normal mode)
[TEL/AUD] key + [Touch panel upper right corner] (Press
twice) → Transit to SS mode
• Switching to SS mode (Only while in production mode)
Press and hold the [TEL/AUD] key q and, within 0.5 sec.,
touch the upper right corner w of the touch panel.
Item Normal mode
15 (-34dB)
35 (0dB)
ON / OFF
NTSC / PAL
ON
OFF
CENTER
0 (all sources)
Through
Through
Through
0
Normal
ON
Natural
Standard
OFF
Rear
AV-IN/iPod
(Depending on
the destination)
Production
mode
←
30 (-10dB)
Always ON
NTSC
OFF
ON
←
←
←
←
←
←
←
OFF
←
←
←
←
AV-IN