GE JGE200 Use & Care Manual page 46

IN THIS CASE, A SERVIPLUS
TECHNICIAN MUST MAKE THE
CONVERSION BEFORE YOU USE
YOUR RANGE; WITH NO CHARGE
(VALID DURING THE FIRST YEAR
FROM THE ORIGINAL PURCHASE).
USE NEW FITTINGS TO PREVENT
GAS LEAKS. APPLY A JOINT
SEALER OR SPECIAL TAPE ON ALL
EXTERIOR CONNECTIONS.
DO NOT USE A FLAME TO DETECT
GAS LEAKS.
IN ORDER TO AVOID GAS LEAKS,
WHEN MOVING YOUR RANGE
AVOID THE GAS CONNECTION
FROM GETTING KINKED OR
CRUSHED.
KEEP THE VICINITY OF THE
RANGE FREE OF
COMBUSTIBLE MATERIALS,
GASOLINE AND OTHER
FLAMMABLE VAPORS OR
LIQUIDS.
2.5 Electrical connections
(On some models, see feature by
model chart at the end of the
manual.)
This appliance was designed to
operate at a rated voltage of 127
V 60 Hz
Make sure there is an available
properly grounded wall outlet,
checked by a qualified electrician.
If your range is equipped with an
oven light, before using it make sure
that the outlet is properly grounded,
and protected by a thermal switch or
a 15 A - 20 A fuse.
Try not to connect any other appli-
ance to the same outlet.
The power cord must be free of
torsions and avoid contact with the
rear of the range. If an extension
cord is needed, you should use a
cord having the same specifications
of the power cord.
Never cut or remove the ground-
ing pin of the plug.
46