Questions And Answers; Display Of Exposure Screen - Canon CXDI-1 Operation Manual

11. Questions and Answers

11.1 Display of Exposure Screen

The exposure screen does not appear on the touchscreen.
Q1-1
Reset the system according to the display on the touchscreen.
Contact a Canon representative or distributor if the problem cannot be resolved even after resetting the
system several times.
A1-1 When the Microsoft Windows XP Professional screen is displayed
•
Select [start] > [Turn Off Computer] > [Turn Off].
When the exposure screen appears completely black or completely blue without showing anything else
•
Refer to the hardware manual, and reset the system.
Nothing is displayed on the touchscreen even when the power is turned ON, or the screen has
Q1-2
frozen with the message Checking NV RAM....
A1-2 Refer to the hardware manual, and reset the system.
No operations can be performed from the touchscreen.
Q1-3
Operation from the touchscreen will not be accepted while the system is performing a process or when the
A1-3 system has crashed. Wait for about one minute and try again.
If it still doesn't work, refer to the hardware manual, and reset the system.
What is the green mark blinking at the upper right side of the exposure screen?
Q1-4
It indicates that the image is being transferred or the image is being processed. It disappears after the
A1-4
process ends.
What are the S and I displayed in the message area of the exposure screen?
Q1-5
A1-5 They are the original IDs issued by the system for DICOM.
What are the small green rectangles in the part where the preview image will be displayed on a
Q1-6
tray type screen after an exposure?
The rectangle shows the Fixed ROI area.
A1-6
For details about the Fixed ROI area, see Setup Guide.
There is no study description button on the exposure screen.
Q1-7
A1-7 Set the Study Description to [ENABLE]. (→ Setup Guide)
The new exposure mode button that has been made is not displayed on the exposure screen.
Q1-8
On the tray type screen, the exposure mode will not be displayed unless it has been POSITION IN TRAY
A1-8
(→ Setup Guide).
The print preview image is not displayed properly on the multiview screen.
Q1-9
Refer to 5.4.2 Choosing Multi-Format after the Exposure (→ page 49) and then set the printer for
A1-9
output.
– 123 –