Connections - Panasonic KX-MB2061CXB Service Manual

KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
8.4.

Connections

Caution:
• When you operate this product, the power outlet should be near the product and easily accessible.
• Be sure to use the telephone line cord supplied with this unit.
• Do not extend the telephone line cord.
8.4.1. Base Unit
(1) Power cord
• Connect to a power outlet.
(220-240 V, 50/60 Hz).
(2) Telephone line cord
• Connect to a single telephone line jack.
(3) To the Internet
(4) Network router/Network hub (not supplied)
• Also connect networked computers.
(5) LAN cable (not supplied)
• To assure continued emission limit compliance, use only shielded LAN cable (category 5 straight cable).
Important notice for the USB connection
• DO NOT CONNECT THE UNIT TO A COMPUTER WITH THE USB CABLE UNTIL PROMPTED TO DO SO DURING THE
SETUP OF MULTI-FUNCTION STATION.
Note:
• Do not place any objects within 10 cm of the right, left and back sides of the base unit.
• If any other device is connected to the same telephone line, this unit may disturb the network condition of the device.
• If you use the unit with a computer and your internet provider instructs you to install a filter (6), please connect it as follows.
Using network router/network hub
• We recommend using network routers/network hubs (4) under secure network environments. Consult your network administrator
for firewall settings, etc.
• The warranty does not cover damage due to security problems or any inconveniences relating to it.
110