124
2 6 0 0 T S E R I E S | P R E S S U R E T R A N S M I T T E R S | O I/ 2 6 6/ F F - E N R E V. E
The Assignment get start and step by step it changes the device Address, and TAG as decided in the configuration....(What written
in grey field of the"Device Assignment for: xxxxx" window above)
At the end the ABB 266 PdP is displayed with its new setting. In this example the address has been changed from 30 to 20 and the
TAG from PI000 to FF_DEVICE_005.
The device appears now alive in the Host, with all the blocks in Out of Service.