Product Specifications; Product Elements; Intended Use - Bosch DMO 10 E Operating Instructions Manual

≈

Product Specifications

Digital Metal Detector
Order number
Maximum detection depth*
Steel to approx.
Copper to approx.
Automatic switch-off
Operating temperature
Storage temperature
Battery
Weight (with battery) approx.
* Dependent on the size, depth and type of metal as well as the material and
condition of the wall (e.g. moisture)

Product Elements

1 "Allowable Drilling Depth" function
2 Green "Drilling Possible" LED indicator
3 Red "Do not Drill" LED indicator
4 Display
5 Handle area with brief operating instructions
6 Battery compartment cover
7 "Search" function
8 Rotary switch
9 Marking stamp
10 On/calibration button on/cal
11 Stamping ring
12 Protective bag
Display Elements
a Measured value of the drilling depth measurement
b Bar indicator for Metal detection and drilling depth measurement
c Calibration indicator CAL
d Indicator for voltage carrying wiring in the measurement area
e Measuring unit in mm for the drilling depth measurement
f Battery indicator

Intended Use

The unit is intended for the detection of metal (e.g. reinforcing iron)
and mains wiring in ceilings and walls.
1 609 929 C79 • (01.10) T
English–1
DMO 10 E
0 603 096 601
50 mm
30 mm
after approx. 75 s
–5 °C ... +50 °C
– 20 °C ... +85 °C
9 V DC 6LR 61
350 g