Safety Notes; Specifications; Product Features - Bosch GMS120 Instruction Manual

Detectores de metales y otros materiales digitales GMS120 bosch manual ingles www.viaindustrial.com
10 | English
English

Safety Notes

Read and observe all instructions. SAVE
THESE INSTRUCTIONS FOR FUTURE REFER-
ENCE.
Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
Detectores de metales y otros materiales digitales GMS120 bosch manual ingles www.viaindustrial.com
Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
For technological reasons, the measuring tool cannot
ensure100 %certainty.T oruleouthazards,safeguard
yourself each time before drilling, sawing or routing in
walls, ceilings or floors by means of other information
sources, such as building plans, pictures from the con-
struction phase, etc. Environmental influences, such as
humidity or closeness to electrical devices, can influence
the accuracy of the measuring tool. Surface quality and
condition of the walls (e.g., moisture, metallic building ma-
terials, conductive wallpaper , insulation materials, tiles)
aswellastheamount,type,sizeandpositionoftheobjects
can lead to faulty measuring results.
Product Description and

Specifications

Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended Use
The measuring tool is intended for the detection of metals
(ferrous and non-ferrous metals, e.g., rebar), joists and "live"
wires/conductors in walls, ceilings and floors.

Product Features

The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Illuminated ring
2 Marking hole
3 Display
4 Operating-mode indication
5 On/Off button
6 Display-illumination button
7 Audio signal button
8 Button for detecting "live" conductors/Operating mode
"Power cable"
9 Button for metal detection/Operating mode "Metal"
10 Button for detecting wood and metal beams/Operating
mode "Drywall"
11 Contact pads
12 Sensor area
13 Type plate
14 Battery lid
15 Latch of battery lid
16 Fixture for carrying strap
17 Protective pouch
18 Carrying strap
The accessories illustrated or described are not included as stand-
ard delivery.