Download Print this page

Operating Instructions - Haier HIS-X76SWA1 Installation Manual/User Manual

Advertisement

Operating instructions

Control panel
WIFI
Upper cavity
Intelligent
About Control buttons
Touch control
Function
button
Turn ON/OFF
Start/Cancel
Upper cavity
functions
Start/Cancel
Lower cavity
functions
Start/Cancel
intelligent
tracking function
Start/Cancel
Dry function
To lock the
buttons on the
control panel,to
prevent misoper
-ation
To Set up and
display wifi
connection
Upper cavity
Lower cavity
Upper cavity Function
Switch on the power of the plug,and the power button icon will be half bright.
Touch the button for 1.5 seconds,the power button icon will be fully bright,
and the other operable function icons will be half bright.Touch the power
button when it is not locked status, the sterilizer will be shut down.
Touch the button continuously when the machine is ON, the icon will be lit
bright,and the function icons of upper cavity
the three functions of Sterilize,Tense sterilize and Cold food sterilize are
selected or cancell ed respectively.5 seconds after the function selection
and without further operation the corresponding function of upper chamber
starts to run.When the upper cavity function program runs, by touching the
button the upper chamber exits the executing function.
Touch the button continuously when the machine is ON, the icon will be lit
bright,and the function icons of lower cavity
the three functions of Warm-keep, Cup-warm and Dish-warm are selected
or cancelled respectively.5 seconds after the function selection and without
further operation,the corres ponding function of lower chamber starts to run.
When the lower chamber function.
Touch the button when the machine is ON,the icon will be lit bright,and the
intelligent tracking function starts to run,the upper chamber will automatical
-ly detect the environment inside, and according to the detection result aut
-omatially run the sterilization program.
Touch the button when the machine is ON, the icon will be lit bright, and the
drying function of upper chamber starts to run.In the process of upper cavi
-ty drying,touch the button to exit the function.
When the machine is on, press the button for 3 seconds to lock the touch
buttons on the control panel. Press the button again for 3 seconds to un-
lock the buttons on the control panel.
When the machine is off, to set up the network, long press the WIFI button
for 5 seconds to enter the setting mode. For specific operation,please refer
to the mobile APP operation manual.
Lower cavity
Dry
Lower cavity Function
Operation details
9
Power
Lock
is lit up or off in a cycle,
is lit up or off in a cycle,

Advertisement

loading