Table of Contents
Advertisement
3. SETTING UP THE RAS FEATURE
Automatic retrigger:
If you select this item, the watchdog timer is automatically retriggered by the
automatic retriggering feature for the watchdog timer. In addition, you cannot use
the watchdog timer by calling the WdtControl function of the RAS library.
If this item is selected, you can configure the retrigger interval of the automatic
retriggering feature and the timeout of the watchdog timer.
● Timeout
Sets the timeout of the watchdog timer by using single-byte numeric characters.
Type an integer value between 5 and 60 (in seconds). The default factory-
shipped setting is 60 (seconds).
● Retrigger interval
Sets the retrigger interval of the automatic retriggering feature for the watchdog
timer by using single-byte numeric characters. Type an integer value between 1
and (timeout - 4) (in seconds). The default factory-shipped setting is 20
(seconds). Note that you can enter a retrigger interval only after you enter a
timeout.
You can set a timeout and retrigger interval only if you select "Automatic
retrigger." If "Automatic retrigger" is not selected, you cannot enter those
values. The default factory-shipped setting for the watchdog timer is "Automatic
retrigger."
3-6
Advertisement
Table of Contents
