Entering Fireground Zone Channel (Conventional); Sending Evacuation Tone - Motorola APX 7000 User Manual

• Response to Evacuation commands
• Pressing the PTT button to make voice transmission
• Sending an Emergency Alarm and Call
• Entering or Exiting a Trunking Talkgroup
2.9.1

Entering Fireground Zone Channel (Conventional)

Procedure:
1 Upon powering up, one of the following scenarios occurs:
• If the Fireground Zone Channel is set as default, you hear the gurgle tone and the radio
displays the home screen. You are in Fireground zone channel.
• If the Fireground Zone Channel is set as default, but you hear a short, low-pitched tone, the
display shows Reg failed to indicate that the command terminal does not respond to
Fireground Zone Channel. Get a qualified technician for assistance.
• If your home channel is not Fireground Zone Channel, toggle or change the radio zone
channel to Fireground Zone Channel.
If you are entering Fireground Trunking Talkgroup, upon powering up, ensure that the
Fireground Trunking Talkgroup is selected. The subscriber unit automatically appears on the
Incident Commander's terminal.
2 Listen for a transmission. Adjust the Volume Control Knob if necessary.
3 Perform one of the following actions.
• Press and hold the preprogrammed Volume Set button to hear the volume set tone. Adjust
the Volume Control Knob if necessary. Release the Volume Set button.
• At the desired Fireground zone and channel, press the preprogrammed Monitor button and
listen for activity. Adjust the Volume Control Knob if necessary.
• If your radio is working in Fireground Zone Channel, proceed to next step.
4 Press and hold the PTT button to transmit. The LED lights up solid red while transmitting. Talk
into the microphone clearly if needed.
5 Release the PTT button to receive.
You hear a Transmit End Tone.
2.9.2

Sending Evacuation Tone

This feature enables the evacuation tone to be heard on the transmitting radio and on any radio that is
able to receive the tone instruction.
Procedure:
Press and hold the PTT button and then short press the Top (Orange) button.
Once the tone begins to sound, if the orange button is released the tone continues to alarm on all
radios within the talkgroup, until the PTT button is released.
NOTICE: Radio does not transmit evacuation tone if the radio is in secure mode.
6875945M01-NL
Advanced Features
87