Advertisement
Step 3.
• Install the console mast cover (31) onto the console mast (2) making
sure it is facing the correct direction as in the picture below. Run the
two wire harnesses (44 & 45) through the bottom of the console mast
tube and out the top opening.
• Slide the console mast into the receiving tube (1) being careful and not
pinch the wires. Fasten the console mast with six bolts (68) on each
side, and four at washers (76) on the side of tube and two curved
washers (83) on the front of tube. Snap the console mast cover in
place.
• Install the front handlebars (3) onto the console mast with two bolts
(113), two split washers (82) and two at washers (76).
Hardware for step 3
Part Type
68
Hex head bolt
76
Flat washer
82
Split washer
83
Curved washer
113
Socket head cap bolt
Description
5/16" × 5/8"
Ø5/16"
Ø8 × 1.5T
Ø5/16"
M8 × 25m/m
76
44
45
3
76
68
13
Qty
6
6
2
2
2
82
113
2
31
68
1
83
76
68
122
112
Advertisement
