Husqvarna 530iPX Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Pole Saw
  5. 530iPX
  6. Operator's manual

Husqvarna 530iPX Operator's Manual

Hide thumbs Also See for 530iPX:
Table of Contents

Advertisement

Quick Links

Download this manual
530iPX
EN
Operator's manual
2-27

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna 530iPX

Summary of Contents for Husqvarna 530iPX

  • Page 1 530iPX Operator's manual 2-27...

  • Page 2: Table Of Contents

    Introduction Product description Note: National regulations can set limit to the operation of the product. Husqvarna 530iPX is a battery pole saw with an electrical motor. Only use the product with accessories that are approved Intended use Accessories on page 25 .
  • Page 3 13. Battery (Accessory) The product or package cannot be disposed 14. Battery release buttons as domestic waste. The product and 15. Battery charger (Accessory) package must be sent to a correct recycling station for the recovery of electrical and 16. Flexible cord electronic equipment.

  • Page 4: Safety

    • the product is incorrectly repaired. • the product is repaired with parts that are not from Use and keep the battery charger indoors the manufacturer or not approved by the only. manufacturer. • the product has an accessory that is not from the manufacturer or not approved by the manufacturer.
  • Page 5 finger on the switch or energising power tools that • Use the power tool, accessories and tool bits etc. have the switch on invites accidents. in accordance with these instructions, taking into account the working conditions and the • Remove any adjusting key or wrench before work to be performed.
  • Page 6 • Do not operate a chain saw in a tree, on a ladder, your pole pruner. As a pole pruner user, you should take from a rooftop, or any unstable support. several steps to keep your cutting jobs free from Operation of a chain saw in this manner could result accident or injury.
  • Page 7 manufacturer. Always use original accessories. Non- usage which you consider to be beyond your authorized modifications and/or accessories can capability. result in serious personal injury or the death of the • Avoid all usage which you consider to be beyond operator and others.
  • Page 8 • Never stand directly underneath a branch that is WARNING: Hearing protectors limit the being cut. This could lead to serious or even fatal ability to hear sounds and warning personal injury. signals. • Observe the applicable safety regulations for work in •...
  • Page 9 • If the safety devices are defective, speak to your Husqvarna servicing dealer. To do a check of the keypad 1. Push the start/stop button (A). 3. Make sure that the power trigger and the lock moves freely and that the return spring works properly.
  • Page 10 Use the BLi batteries that are rechargable as a saw chain that is damaged or incorrectly sharpened power supply for the related Husqvarna products increases the risk of accidents. only. To prevent injury, do not use the battery as a power supply for other devices.

  • Page 11: Assembly

    • Risk of electrical shock or short circuit if the safety • Use approved mains sockets that are not damaged. instructions are not obeyed. Make sure that the cord of the battery charger is not damaged. If extension cables are used, make sure •...
  • Page 12 To assemble the shock guard 4. Align the hole in the guide bar with the chain adjuster pin and install the clutch cover. Make sure that the 1. Use 6 screws to attach the shock guard. drive links fit correctly on the chain drive sprocket (B).
  • Page 13 To connect the battery to the product WARNING: Only use Husqvarna original batteries with the product. 1. Make sure that the battery is fully charged. 1. Put on the harness.

  • Page 14: Operation

    To fill with chain oil 2. Fill with Husqvarna chain oil. 3. Attach the chain oil cap. Fill with chain oil after 1 hour of operation or when the battery is empty. 1. Open the chain oil cap on top of the saw head.
  • Page 15 To start the product To fell a tree 1. Push and hold the start/stop button until the green • Do not fell trees into uncleared areas. LED is on. • When you cut, do the work in the 9 to 12 o' clock sector.
  • Page 16 • You should plan the strip so that you avoid going • Cut large branches in sections. Note that falling over ditches or other obstacles on the ground. You branches can bounce in the direction of the user should also orient the strip to take advantage of wind after hitting the ground.

  • Page 17: Maintenance

    Maintenance Introduction Maintenance schedule WARNING: Read and understand the safety WARNING: Remove the battery before you chapter before you do maintenance work on the product. do maintenance. The following is a list of the maintenance steps that you must do on the product. Refer to the tasks in the WARNING: Remove the battery before you maintenance chapter for more information.
  • Page 18 Make sure that the saw head is not dam- An approved Husqvarna dealer must do all servicing on the saw aged. Replace the saw head if it is damaged. head. To examine the battery and the 5.
  • Page 19 3. Clean the groove in the guide bar. Replace a worn or damaged guide bar or saw chain with the guide bar and saw chain combination recommended by Husqvarna. This is necessary to keep the safety Accessories on page functions of the product. Refer to 25 , for a list of replacement bar and chain combinations that we recommend.
  • Page 20 • Bar groove width, in/mm. The groove width in guide • Filing angle. bar must be the same as the chain drive links width. • Cutting angle. • Chain oil hole and hole for chain tensioner. The guide bar must align with product. •...
  • Page 21 instructions about how to receive the correct depth Accessories on page 25 for information Note: See gauge setting for your saw chain. about which file and gauge that we recommend for your saw chain. 2. Make sure that the saw chain has the correct tension.
  • Page 22 To tension the chain 6. Make sure you can pull the saw chain around freely by hand and that it does not hang from the guide bar. WARNING: A saw chain with an incorrect tension can derail from the guide bar and cause serious injury or death.

  • Page 23: Troubleshooting

    1. Check that the oil channel in the bar is not 2. Remove the clutch cover (B). obstructed. Clean if necessary. 3. Disassemble the washer clip (C). 4. Remove the washer (D). 5. Remove the chain drive sprocket (E). 2. Check that the oil channel in the gear housing is clean.

  • Page 24: Transportation, Storage And Disposal

    Battery LED display Possible faults Possible action Green activate LED flashing Low battery voltage. Charge the battery. Error LED flashing The battery is discharged. Charge the battery. Temperature deviation. Use the battery in surroundings where tem- peratures are between -10°C (14°F) and 40°C (104°F).

  • Page 25: Technical Data

    50-60 50-60 Power, W The Husqvarna Handheld Battery products marked with IPX4 fulfils these requirements on product approval level Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (stand- ard deviation) of 1 dB (A).
  • Page 26 Type Length, drive Low kickback links, no. Husqvarna H37 Saw chain filing and file gauge If you do not know which saw chain you have on your product, speak to your servicing dealer. Use the recommended file gauge to get the correct filing angles.

  • Page 27: Ec Declaration Of Conformity

    Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares that the pole saw Husqvarna 530iPX with serial numbers dating 2018 and onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE:...
  • Page 28 Original instructions 1140372-26 2018-11-12...

Table of Contents