Leds & Physical Connections - D-Link DFL-1100 User Manual

LEDs & Physical Connections
Power: A solid light indicates a proper connection to the power supply.
Status: A System status indicator that flashes occasionally to indicate a functional, active
system. Solid illumination of the Status LED indicates a hardware/software critical failure.
WAN, LAN, DMZ, & ETH4: Bright Green illumination indicates a valid Ethernet Link on
that respective port. Each LED will flicker when that respective port is sending or receiving
data.
COM Port: Serial Read-Only access to the firewall software from a PC equipped with a
Serial COM port (9600 baud, 8 data bits, No Parity, 1 Stop bit, No Flow Control).
WAN Port: Use this port to connect to an external network, such as a WAN or a modem
provided by an ISP.
LAN Port: Use this port to connect to a Fast Ethernet Switch to service more than 1 client
PC on the internal office network.
DMZ Port: Use this port to service an additional physically segmented Private or
Transparent Network to be occupied by WAN accessible servers (FTP, HTTP, DNS).
DC Power (on rear of unit): Use the included PC power cable to connect to an
110/120VAC electrical receptacle. Do not use more than 110/120VAC to power the
device, doing so will damage the unit.
Power Switch (on rear of unit): Use the Power switch to turn the DFL-1100 off and on.