Sony FDR-X1000V Startup Manual page 2

Menu items
List of modes Items you can set in SETUP
Display Modes Display Items
LOOP Loop recording mode VMODE Image quality setting mode
MOVIE Movie mode V.FMT Movie format
PHOTO Photo mode STEDY SteadyShot
INTVL Interval photo recording mode AUDIO Audio recording
LIVE Live streaming mode WIND Wind noise reduction
COLOR Color mode
SETUP Setup mode
L.OPT Loop recording time
PLAY Play mode DRIVE Still image mode switching
PwOFF Power off FPS Still image shooting interval
SELF Self-timer
ANGL Still image angle of view
Notes
LAPSE Interval photo recording
• Button operations
FLIP Flip
– NEXT: Goes to the next menu
SCENE Scene
– PREV: Goes to the previous menu
WB White balance
– ENTER: Executes the menu
• To return to the [SETUP] or [CONFG] menu from AESFT AE shift
each setup item, select [BACK], then press the
ENTER button. CONFG Configuration Settings
• When you press the NEXT button and PREV button
simultaneously, you can go to the Wi-Fi setting
menu.
• The menu may change depending on the camera
operating conditions.
Connecting to a separately sold Live-View Remote
Items you can set in CONFG
1
Display Items
Turn on the power of the Live-View Remote.
Wi-Fi Wi-Fi connection
For details on operation, refer to the Help Guide of the Live-View
GPS GPS log
Remote.
PLANE Airplane mode
2
MOUNT Mount* 1
Press the NEXT or PREV button to select [SETUP] 
TC/UB Time code/user bit
[CONFG]  [Wi-Fi]  [ON].
IR-RC IR-remote controller
HDMI HDMI settings
3
BGM Back ground music* 1, * 2
Select the SSID of the camera (attached to this manual) on
USBPw USB power supply
the Live-View Remote.
A.OFF Auto power off
BEEP Beep 4
DATE Date & time setting When [ACPT?] is displayed on the display panel of the
Daylight saving time (summer time) camera, press the ENTER button of the camera.
DST
setting
LANG Language setting
Connecting to the smartphone
V.SYS Switching NTSC/PAL
VER. Version
You can operate the camera with your smartphone as well as the
FORMT Format
separately sold Live-View Remote.
RESET Resetting the settings
Installing PlayMemories Mobile™ on
* 1 These are the setup items for Highlight Movie
Maker. For details, refer to the Help Guide.
your smartphone
* 2 This function is not available in some countries/
regions.
Android OS
Search for PlayMemories Mobile on Google Play, then
install it. When using One-touch functions (NFC),
Android 4.0 or later is required.
iOS Android (Supporting NFC)
Search for PlayMemories Mobile on App Store, then Set Wi-Fi to ON on the camera, and touch the
install it. When using iOS, One-touch functions (NFC) are smartphone against the
not available. When PlayMemories Mobile starts, settings are automatically applied
to establish Wi-Fi connection.
Notes
• Update PlayMemories Mobile to the latest version if you have already installed iPhone
it on your smartphone.
 Turn on the camera, and set Wi-Fi to ON on the camera.
• The Wi-Fi function described in this manual is not guaranteed to work with all
 Select the shooting mode: [LOOP], [MOVIE], [PHOTO], [INTVL].
smartphones and tablets.
 Open [Settings] on the smartphone.
• The operation methods and display screens for the application are subject to
 Select [Wi-Fi] on the smartphone.
change without notice by future upgrades.
 Select the SSID that is printed on the sticker attached to this manual.
• For more information about PlayMemories Mobile, refer to the following
 Input the password on the same sticker (First time only).
website.
 Confirm that the SSID of the camera is displayed on the smartphone.
(http://www.sony.net/pmm/)
• Google play may not be supported depending on country or region. In this case,
 Return to the Home screen, then start PlayMemories Mobile.
search for "PlayMemories Mobile" on the internet then install it.

Connecting
Android
 Turn on the camera, and set Wi-Fi to ON on the camera.
 Select the shooting mode: [LOOP], [MOVIE], [PHOTO], [INTVL].
 Start PlayMemories Mobile on the smartphone.
 Select the SSID that is printed on the sticker attached to this manual.
 Input the password on the same sticker (First time only).
If the sticker is lost
  
If the sticker is lost, you can recall your user ID and password by the
following procedure.
 Insert a charged battery pack into the camera.
 Connect the camera to a computer with the micro USB cable
(supplied).
 Press the NEXT or PREV button to turn the camera on.
 Display [Computer]  [PMHOME]  [INFO]  [WIFI_INF.TXT] on
your computer, then confirm your ID and password.
Using Help Guide
(N mark) of the
(N mark) of the camera. "Help Guide" is the online instruction manual.
Use this for details on how to use the camera, what you can set/
operate with your smartphone, and safety precautions.
http://rd1.sony.net/help/cam/1520/h_zz/
  