FLEXIDOME IP starlight 6000 VR
5
Installation
5.1
Preparation
To separate the different parts of the camera:
1.
2.
3.
4.
To remove the desiccant sachet:
1.
2.
5.2
Local storage
Notice!
Local storage on memory cards should only be used for alarm recording. To minimize the risk
of losing information, use multiple, redundant recording systems and a procedure to back up
all digital information.
To insert a memory card:
1.
2.
Bosch Security Systems B.V.
Remove the outer dome by unscrewing the 3 attachment bolts.
Remove the inner dome by gently pulling it from its mount seal.
Store the domes in a safe place where the outer dome cannot become scratched.
Remove the camera module from the surface mount box by unscrewing the 3 screws.
Slide the sachet out of its storage slot in the camera.
Dispose of the sachet in an environmentally friendly way.
DESICCANT
SILICA GEL
x3
Slide the memory card into the slot.
Press it firmly until it latches into place in the slot (when removing the card, press it
down firmly again until it unlatches).
Installation manual
Installation | en
9
03.2019 | V2.0 | AM18-Q0711