Product Composition - Panasonic et-jpc100bu Installation Instructions Manual

Product composition

Check that the package contains the following parts. The number enclosed in < > is the quantity.
Ceiling mount bracket <1>
Projector mount bracket <1>
Adapter cover <1>
(ET-JPC100BU: TKFE28802)
(ET-JPC100WU: TKFE28801)
String (6103430249) <1>
Fixer cable tie (TMME244) <1>
Screw, captive washer (M4 x 8) <8>
(ET-JPC100BU: XYN4+F8FJK)
(ET-JPC100WU: 4112055002)
Attention
 After removing the product from the package, dispose of the packing material appropriately.
 If any part is missing, contact the dealer.
 Store small parts appropriately in a place out of the reach of infants and small children.
Note
 Please note that an assembly test has been performed using all parts so this product may have screw
tightening marks around the parts where the ceiling mount bracket and projector mount bracket fi t together.
 The product composition, projector, combination of the product and projector, etc. shown in the illustrations may
differ from the actual equipment.
6 - ENGLISH
This ceiling mount bracket is mounted to the ceiling to
support the entire product.
It has a terminal block for connecting the indoor wiring
for the power supply, and a power cord that is connected
to the projector to supply it with power.
This projector mount bracket is mounted to the projector
and then attached to the ceiling mount bracket.
This adapter cover hides the <AC IN> socket part of the
projector.
This is to prevent the adapter cover from dropping.
This is used for fi x the indoor wiring for the power supply
to the ceiling mount bracket so as to stop tension being
applied.
These are used for the mounting and attaching of the
brackets.