Panasonic et-jpc100bu Installation Instructions Manual page 3

Table of Contents

Advertisement

Read this fi rst! (continued)
CAUTION
Do not install this product in a location where salt damage occurs or corrosive gas is generated.
Doing so may may cause falling due to corrosion.
Do not use the projector together with dimmers such as a light controller.
Doing so will result in the damage to the components inside the projector and will cause fi re.
Do not put excessive force on the projector by hanging on the projector or dangling any object.
Doing so will result in falling of the projector and injuries.
Mount this product in the specifi ed orientation to a fl at ceiling or a ceiling with a slope of up to 45°.
Mounting this product to an inappropriate surface such as to a wall, fl oor, or ceiling with a steep slope or
mounting it in the wrong orientation may cause a falling accident.
Install the ceiling mount screws and bolts so that they do not touch any metal inside the ceiling.
If they touch metal inside the ceiling, a fi re or electric shock may result.
When disconnecting the power cord, be sure to hold the power connector.
If the power cord itself is pulled, the lead will become damaged, and fi re, short-circuits or serious electric
shocks will result.
 Panasonic disclaims all liability for any accidents or any damage caused by the installation
of the ceiling mount bracket using methods that are not described in these Installation
Instructions or methods that do not use the parts specifi ed in these Instructions.
 If products are no longer being used, they should be dismantled and removed by the
certifi ed personnel as soon as possible.
ENGLISH - 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Et-jpc100wu

Table of Contents