Advertisement
34
English
SmartClean system
Problem
The SmartClean
system does
not work when I
press the on/off
button.
The shaver is not
entirely clean
after I clean it in
the SmartClean
system.
The shaver is
not fully charged
after I charge it in
the SmartClean
system.
Possible cause
The SmartClean
system is not
connected to the
wall socket.
The cleaning
cartridge is empty.
The replacement
symbol flashes to
indicate that you
have to replace the
cleaning cartridge.
You have not placed
the shaver in the
SmartClean system
properly, so there is no
electrical connection
between the
SmartClean system
and the shaver.
The cleaning
cartridge needs to
be replaced.
You have used
another cleaning
fluid than the
original Philips
cleaning cartridge.
The drain of the
cleaning cartridge is
blocked.
You have not placed
the shaver in the
SmartClean system
properly, so there is no
electrical connection
between the
SmartClean system
and the shaver.
Solution
Put the small plug in the
SmartClean system and put
the supply unit in the wall
socket.
Place a new cleaning
cartridge in the SmartClean
system.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
Replace the cleaning
cartridge.
Only use the original Philips
cleaning cartridge.
Remove the cartridge from
the SmartClean system and
push the hairs down the
drain with a toothpick.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
Advertisement
